Horst

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Arch Linux Installation ======
  - gparted bootbaren USB-Stick erstellen, von diesem booten. 
  - Sämtliche Partitionen außer der EFI System-Partition löschen, diese von 260 auf 512M erweitern.
  - neue Partition /dev/nvme0n1p2 erstellen mit restlichem Platz
  - vom bootbaren Arch-USB-Stick booten
  - https://wiki.archlinux.org/index.php/installation_guide
  - https://wiki.archlinux.de/title/Arch_Linux_auf_Deutsch_stellen

===== WLAN =====
https://wiki.archlinux.org/index.php/Wireless_network_configuration

''wpa_passphrase SSID password > /etc/wpa_supplicant/mywlanconnection.conf''\\
''wpa_supplicant -B -i wlp4s0 -c /etc/wpa_supplicant/mywlanconnection.conf''\\
''dhcpcd wlp4s0''

====NetworkManager ====
https://linuxhint.com/arch_linux_network_manager/

''sudo pacman -S networkmanager''
''sudo pacman -S nm-connection-editor network-manager-applet''
''sudo systemctl enable NetworkManager.service''
''sudo systemctl disable dhcpcd.service''
''sudo systemctl enable wpa_supplicant.service''
''sudo systemctl start NetworkManager.service''

===== File System =====
''mount /dev/nvme0n1p2 /mnt''\\
''mkdir /mnt/boot''\\
''mount /dev/nvme0n1p1 /mnt/boot''

==== Swap file ====
https://wiki.archlinux.org/index.php/swap
''fallocate -l 512M /mnt/swapfile''\\
''chmod 600 /mnt/swapfile''\\
''mkswap /mnt/swapfile''\\
''swapon /mnt/swapfile''

==== Boot manager ====
systemd-boot (gummiboot):\\
''bootctl --path=/boot install''\\
''e2label /dev/nvme0n1p2 ROOT''\\
''bootctl --path=/boot update''\\

/etc/mkinitcpio.conf:
MODULES="crc32_generic crc32-pclmul libcrc32c crc32c_generic crc32c-intel"\\

mkinitcpio -p linux


===== LXDE =====
''pacman -S lxde'' --> Standardeinstellungen, alle Pakete auswählen\\
''pacman -S xorg-xinit'' --> ~/.xinitrc erstellen, dort u.a. exec startlxde eintragen https://wiki.archlinux.org/index.php/Xinit

==== Touchpad ====
''pacman -S xf86-input-synaptics''\\
https://wiki.archlinux.org/index.php/Touchpad_Synaptics

==== Sound ====
''pacman -S alsa-utils''\\
alsamixer: unmute (m) speakers

==== Font configuration  ====
''pacman -S xorg-xrdb''\\
use .Xresources file:\\
''Xft.lcdfilter: lcddefault\\
Xft.antialias: true\\
Xft.autohint: 0\\
Xft.hinting: true\\
Xft.hintstyle: hintslight\\
Xft.rgba: rgb\\
Xft.dpi: 96'' \\
https://wiki.archlinux.org/index.php/x_resources\\
https://wiki.archlinux.org/index.php/font_configuration\\
''xrdb --merge .Xresources''

 ==== USB Automount  ====
udev-rule anlegen: http://kissmyarch.blogspot.de/2011/10/usb-automount.html\\
funktioniert nicht wirklich. udisks2 + manual mount does the trick. rw!!!
https://wiki.archlinux.de/title/Udev\\
https://wiki.archlinux.org/index.php/USB_Storage_Devices#As_normal_user_with_mount


===== AUR (Arch User Repository)  =====
 ==== Installation von yaourt  ====
https://wiki.archlinux.de/title/yaourt\\
''pacman -S base-devel''\\
''pacman -S wget''\\
''pacman -S diffutils''\\

===== Nitrokey =====
https://www.nitrokey.com/documentation/installation#p:nitrokey-pro&os:linux\\
''pacman -S ccid''\\
laut Anleitung die libccid_info.plist anpassen (Nitrokey Kennungen eintragen)\\
udev-rule für den Nitrokey erstellen (evtl. beim Installieren der Nitrokey-App erledigt?)\\
udev neustarten? Keine Ahnung wie. Angeblich findet udev die neuen rules selbst...\\
''pacman -S snapd''\\
''systemctl enable --now snapd.socket''\\
''sudo snap install nitrokey-app''\\
rechner neustarten, dann kann nitrokey-app mit Fn+Alt+F2 gestartet werden, Nitrokey wird beim Reinstecken erkannt\\
http://xmodulo.com/linux-security-with-nitrokey-usb-smart-card.html\\
btw: using subkeys... https://wiki.fsfe.org/TechDocs/CardHowtos/CardWithSubkeysUsingBackups\\

===== Gajim =====
OMEMO-Plugin braucht python-axolotl. Abhängigkeit python-axolotl-curve25519 muss aus irgendeinem Grund manuell installiert werden.\\
''yaourt -S python-axolotl-curve25519''\\
''yaourt -S python-axolotl''

===== Sonic Pi =====
''yaourt -S sonic-pi''\\
Installation von ruby-rugged schlägt fehl: falsche Version von libgit2 erwartet (0.25, installiert ist 0.26) (--use-system-libraries sollte aktuell installierte Version nehmen)\\
Das scheint ein Problem mit openssl1.1.0 zu sein. Empfehlung ist, alles mögliche mit openssl1.0 zu kompilieren. Funktioniert nicht wirklich besser. Gaaaa.\\

===== Google Chrome =====
https://linuxhint.com/install-google-chrome-on-arch-linux/\\
clone git repo\\
''mkpkg -s''\\
''sudo pacman -U google-chrome-xxx.tar.xz''

===== Docker =====
''sudo pacman -S docker''\\
''sudo systemctl enable docker.server'' (startet docker automatisch beim Hochfahren)\\
Neustarten, weil neues Kernelmodul bridge installiert wird...

''sudo docker pull couchbase/server'' lädt image herunter (latest version)\\
''sudo docker pull microsoft/mssql-server-linux:2017-latest''\\
https://docs.microsoft.com/en-us/sql/linux/quickstart-install-connect-docker\\

https://serverfault.com/questions/738773/docker-failed-to-add-the-pair-interfaces-operation-not-supported:\\
That is normal, since on a kernel upgrade, all .ko module files in /usr/lib/modules/{KERNEL_VERSION} of the running kernel are deleted. Docker needs some tun / tap modules to create the interfaces and trying to load them fails after a kernel upgrade. Rebooting helps because all module files are there for the new kernel. Another work-around would be to re-extract the modules for the old kernel if you still have the pacman package lying around and want to avoid the reboot. –


===== Email Backup =====
''sudo pacman -S offlineimap''\\
''openssl s_client -connect imap.provider.de:993 < /dev/null 2>/dev/null | openssl x509 -fingerprint -noout -in /dev/stdin''

===== Battery life =====
''sudo pacman -S tlp''\\
thinkpads need kernel module acpi_call or tp_smapi\\
http://thinkwiki.de/TLP_-_Linux_Stromsparen#Arch_Linux

===== Camera =====
install: libgphoto2, gphoto2 (command line tool being able to do about anything with the cam)\\
Download all: ''gphoto2 –get-all-files'' \\
List all files on cam: ''gphoto2 --list-all-files''\\
Download single files and rename them like in jhead: ''gphoto2 --get-file 348-349 --filename %Y%m%d-%H%M%S.jpg''\\

===== Bluetooth =====
systemctl start bluetooth
bluetoothctl
further bluetooth commands: https://wiki.archlinux.org/index.php/Bluetooth_headset\\
install blueman package\\
https://wiki.archlinux.org/index.php/Bluetooth#Graphical\\
/etc/pulse/system.pa\\
...\\
load-module module-bluetooth-policy\\
load-module module-bluetooth-discover\\

https://wiki.archlinux.org/index.php/Bluetooth_headset\\

===== Folding@home =====
https://wiki.archlinux.org/index.php/folding@home

==== GPU ====
Graphics:  Intel Corporation Skylake GT2 [HD Graphics 520] (rev 07)
sudo pacman -S ocl-icd\\
https://wiki.archlinux.org/index.php/GPGPU\\
sudo pacman -S beignet (open source openCL runtime)

===== LaTeX =====
https://wiki.archlinux.org/index.php/TeX_Live\\
edit tlmgr.pl

===== GMX Cloud =====
''mkdir /home/andrea/gmxcloud''\\
''yay -S davfs2''\\
add \\
https://webdav.mc.gmx.net /home/andrea/gmxcloud davfs rw,noauto,user 0 0 \\
to fstab\\
''sudo chmod u+s /usr/sbin/mount.davfs''\\
''sudo usermod -a -G davfs2 andrea''\\ 
add davfs2 secret to /home/andrea/.davfs2/secrets:\\
''chmod 600 ~/.davfs2/secrets''\\
/home/andrea/gmxcloud email-adresse@gmx.net PasswortImKlartext\\
''cp /etc/davfs2/davfs2.conf ~/.davfs2/ gedit ~/.davfs2/davfs2.conf''\\
edit davfs2.conf:\\
if_match_bug 1\\
use_locks 0\\
cache_size 1\\
table_size 4096\\
delay_upload 1\\
gui_optimize 1\\
fstab neu einlesen: ''sudo mount -a''\\ 
''mount gmxcloud''